services


Main our services are listed below. This list is not limited. It can be supplemented with another services.

Engineering consulting

We consult companies, firms and private persons to provide successful solving of technical problems that spring up during design process of processes and equipment that is bounded with themes specified in our blog.

Independent expertise

We carry out a projects examination in the next areas: Mechanical drives & transmissions; Hydrogen generating installations; Combustion chambers of stationary & transport gas-turbine installations & engines; Liquid & gaseous fuel supplying system; Fuel injectors; Pumping installations & systems; Heat exchange processes & devices

Lectures & training courses

We prepare lectures and training courses bounded with themes specified in our blog (under the contractual agreement). Universities and companies can order special courses for students and novice engineers

Project development

We work out and Develop projects (MCR, SSR, MDR, SDR, PDR, CDR stages) including execution of technical calculations, elaboration of models and design documents, and process simulations bounded with themes specified in our blog (under the contractual agreement)

Technical articles & comments

We execute presentations and technical reviews of equipment & processes that are bounded with themes specified in our “independent expertise” service, In the special cases, the presentation or review can be published on themes that are of interest for us.

Presentation & reviews

We expose technical articles, brief notes and comments bounded with themes specified in our “independent expertise” service. The articles contain technical analysis of different objects and can be commented in the blog.

order now and get discount 5% off recieve discount

oder now


Main our services are listed below. This list is not limited. It can be supplemented with another services.

Name
Email
Subject
Message

By clicking on the Send Message button, you agree to the privacy policy privacy policy

Design objects

In accordance with client’s requirements specification we work out the following objects:

  • Independent supply sources (ISS);
  • Technical components of Air Independent Propulsion (AIP) systems for conventional submarines;
  • Reactors and another equipment for hydrogen production from different hydrocarbon fuels, methanol, ethanol, ammonia etc.;
  • Storage tanks and another components of liquid oxygen storage systems;
  • Oxygen extraction systems from sea water;
  • Small jet engine and jet engine’s components;
  • Gas turbine and jet engine’s combustion chambers (different types);
  • Industrial combustion chambers;
  • Pneumatic and Hydraulic systems;

Engineering

We suggest the following stages of the engineering process:

  • Problem definition (establishing design requirements);
  • Reverse Engineering
  • Conceptual design,
  • Feasibility assessment,
  • Preliminary design,
  • Detailed design,

Design requirements

Establishing design requirements, sometimes termed problem definition, is one of the most important elements in the design process, HYPERLINK \l “cite_note-5” [5] and this task is often performed at the same time as a feasibility analysis. The design requirements control the design of the project throughout the engineering design process. These include basic things like the functions, attributes, and specifications – determined after assessing user needs. Some design requirements include hardware and software parameters, maintainability, availability, and testability.

Sources of Information

Various stages of the design process can involve a significant amount of time spent on locating information. It should be noted that significant information required to design stated above objects was being collected for some years. Consideration is given to the existing applicable literature, problems and successes associated with existing solutions. The sources of information applied for design are relevant, including existing solutions.

Other sources of information include the Internet publications, local libraries, available government documents, personal organizations, trade journals, vendor catalogs and available reports of individual experts.

Reverse Engineering

We widely apply reverse engineering that is an effective technique if other methods are not available for an analysis.

Conceptual design

A conceptual design (conceptualization, conceptual engineering) is a phase of design that includes producing of ideas and their evaluation taking into account the pros and cons that can be obtained in results of implementing those ideas. All suggested ideas must undergo a concept evaluation step. During the evaluation, a various tools are utilized to compare and contrast the relative strengths and weakness of possible alternatives.

This conceptual stage of a project is performed to minimize the likelihood of error, manage costs, assess risks, and evaluate the potential success of the intended project.

Feasibility assessment

The feasibility study is an analysis and evaluation of the potential of a proposed project to support the process of decision making. It describes and analyses alternative solutions and methods of achieving the desired outcome. The feasibility study helps to narrow the scope of the project to identify the best scenario. A feasibility report is generated following which Post Feasibility Review is performed.

The purpose of a feasibility assessment is to determine reasonability of the design proceeding in further . This is based on two criteria: the project needs to be based on an achievable idea, and it needs to be within cost constraints. It is important to have engineers with experience and good judgment to be involved in this portion of the feasibility study.

Preliminary design

The preliminary design, or high-level design is the bridge between design conception and detailed design, particularly in cases when the level of conceptual design is not sufficient for full evaluation. So in this stage, the overall system configuration is defined, and the schematics, diagrams, and layouts of the project may provide early project configuration and evaluation. During detailed design and optimization, the parameters of some parts can be changed, but the preliminary design focuses on creating the general framework of the project.

Detailed Design

Within the bounds of this phase each aspect of the project / product by complete description through solid modeling, drawings as well as specifications are elaborates.

Reporting

Every stage of the design process is finished by Technical report including the following main parts:

  • Introduction;
  • Task description and/or Initial data;
  • Suggested solutions;
  • Calculation results;
  • Conclusions;
  • References;
  • The content of the final report is approved by client;